MICROPARTICLE PATTERNING in MICROFLUIDIC SYSTEMS via PIEZOELECTRIC PHONONIC CRYSTALS


Res. Asst. NURSELİ SEDA GENÇ

Thesis Type: Postgraduate

Institution Of The Thesis: Istanbul University, Faculty Of Science, Department Of Physics, Turkey

Thesis Supervisor: Furkan Kuruoğlu

Approval Date: 2025

Thesis Language: Turkish

Abstract:

Microfluidic systems are used to control fluids or particles at micron or submicron scales. These systems have a wide range of applications, from biological research to

industrial processes. Among the most common applications of microfluidic systems are cell manipulation, cell alignment, and cell isolation. These systems can be employed to manipulate individual cells and to arrange them in specific patterns. Furthermore, microfluidic systems can be used for size-based separation or aggregation of particles, which is highly significant for biotechnology and medical research. Acoustofluidic systems are a widely used cell manipulation method in microfluidic applications. In such systems, Surface AcousticWaves (SAWs) generated on piezoelectric

substrates are used to control the motion of biological particles. SAWs operate in a non-contact manner and do not require labeling due to their biocompatibility, making

them suitable for handling biological samples. In this thesis study, the use of piezoelectric phononic crystals (PPnCs) is explored as a potential approach for enhancing acoustofluidic systems. Based on the geometric parameters of interdigitated transducers (IDTs) and PPnC structures, the propagation of surface acoustic waves is inhibited within certain frequency ranges. This directly

affects the acoustic pressure field generated within the microchannel and consequently alters the spatial distribution of microparticles through acoustic radiation forces. These acoustic interactions were analyzed through numerical simulations based on the Finite Element Method (FEM). A microfluidic device was fabricated by employing various patterning techniques including photolithography, focused ion beam (FIB) lithography,

electron beam lithography (EBL), and soft lithography for the construction of IDTs, PPnCs, and the microchannel. The transmission spectra of the IDT–PPnC pairs were

used to characterize SAW behavior, while optical imaging techniques were employed to evaluate the particle patterning performance of the device.