A quantitative comparison between electrocoagulation and chemical coagulation for boron removal from boron-containing solution


YILMAZ A. E., Boncukcuoglu R., KOCAKERIM M. M.

JOURNAL OF HAZARDOUS MATERIALS, cilt.149, sa.2, ss.475-481, 2007 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 149 Sayı: 2
  • Basım Tarihi: 2007
  • Doi Numarası: 10.1016/j.jhazmat.2007.04.018
  • Dergi Adı: JOURNAL OF HAZARDOUS MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.475-481
  • İstanbul Üniversitesi Adresli: Hayır

Özet

This paper provides a quantitative comparison of electrocoagulation and chemical coagulation approaches based on boron removal. Electrocoagulation process delivers the coagulant in situ as the sacrificial anode corrodes, due to a fixed current density, while the simultaneous evolution of hydrogen at the cathode allows for pollutant removal by flotation. By comparison, conventional chemical coagulation typically adds a salt of the coagulant, with settling providing the primary pollutant removal path. Chemical coagulation was carried out via jar tests using aluminum chloride. Comparison was done with the same amount of coagulant between electrocoagulation and chemical coagulation processes. Boron removal obtained was higher with electrocoagulation process. In addition, it was seen that chemical coagulation has any effect for boron removal from boron-containing solution. At optimum conditions (e.g. pH 8.0 and aluminum dose of 7.45 g/L), boron removal efficiencies for electrocoagulation and chemical coagulation were 94.0% and 24.0%, respectively. (c) 2007 Elsevier B.V. All rights reserved.