Simultaneous glycolysis and hydrolysis of polyethylene terephthalate and characterization of products by differential scanning calorimetry

Guclu G., Yalcinyuva T., Ozgumus S. K., ORBAY M.

POLYMER, cilt.44, sa.25, ss.7609-7616, 2003 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 44 Sayı: 25
  • Basım Tarihi: 2003
  • Doi Numarası: 10.1016/j.polymer.2003.09.062
  • Dergi Adı: POLYMER
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.7609-7616
  • İstanbul Üniversitesi Adresli: Evet

Özet

Simultaneous glycolysis and neutral hydrolysis of waste polyethylene terephthalate (PET) has been carried out at 170 and 190 degreesC with constant amount of ethylene glycol (EG) and increasing amounts of water, in the presence of xylene. The organic solvent made it possible to employ very low amounts of reactants as well as application of lower temperatures and pressures in contrast with previous methods, yielding intermediates suitable for PET or other polymeric materials. These intermediates were characterized by acid value (AV), hydroxyl value (HV) determinations as well as by differential scanning calorimetry (DSC). A water soluble crystallizable fraction with high purity, consisting of mono 2-hydroxy ethyl ester of terephthalic acid (monohydroxyethyl terephthalate, MHT) monomer has been obtained with significant yield and its polymerization tendency has been compared with that of bis(2-hydroxy ethyl) terephthalate (BHET) by application of multiple heating/cooling cycles in DSC. (C) 2003 Elsevier Ltd. All rights reserved.

Simultaneous glycolysis and neutral hydrolysis of waste polyethylene terephthalate (PET) has been carried out at 170 and 190 °C with constant amount of ethylene glycol (EG) and increasing amounts of water, in the presence of xylene. The organic solvent made it possible to employ very low amounts of reactants as well as application of lower temperatures and pressures in contrast with previous methods, yielding intermediates suitable for PET or other polymeric materials. These intermediates were characterized by acid value (AV), hydroxyl value (HV) determinations as well as by differential scanning calorimetry (DSC). A water soluble crystallizable fraction with high purity, consisting of mono 2-hydroxy ethyl ester of terephthalic acid (monohydroxyethyl terephthalate, MHT) monomer has been obtained with significant yield and its polymerization tendency has been compared with that of bis(2-hydroxy ethyl) terephthalate (BHET) by application of multiple heating/cooling cycles in DSC.