Color stability of graphene oxide reinforced monolithic zirconia after hydrothermal aging


Şen N.

JOURNAL OF CERAMIC PROCESSING RESEARCH, cilt.25, sa.6, ss.1007-1012, 2024 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 25 Sayı: 6
  • Basım Tarihi: 2024
  • Doi Numarası: 10.36410/jcpr.2024.25.6.1007
  • Dergi Adı: JOURNAL OF CERAMIC PROCESSING RESEARCH
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Communication Abstracts, Metadex, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.1007-1012
  • İstanbul Üniversitesi Adresli: Evet

Özet

The purpose of the study was to investigate the influence of graphene oxide (GO) and hydrothermal aging on the color stability of monolithic zirconia with different yttria concentrations. Disc shaped specimens (N=60) with a diameter of 15.0mm and a thickness of 1.0 mm were prepared from zirconia blocks having different yttria concentrations (HT, ST, and XT). Half of the specimens were immersed in 0.2 wt% GO-water dispersion (HTG, STG, and XTG). Color parameters were assessed using a reflection spectrophotometer before and after 5 and 10 hours of hydrothermal aging. Color differences (Delta E-00) were calculated and compared to perceptibility and acceptability visual thresholds. Data were statistically analyzed with 2-way ANOVA followed by post-hoc comparisons (alpha=.05). Regardless of the aging time applied, Delta E-00 values below PT were found in the groups of HT, ST, and XT. Hydrothermal aging significantly increased Delta E-00 values in the groups of HTG, STG, and XTG that presented values above AT (p<.001). Immersion in GO-water dispersion significantly increased Delta E-00 values of zirconia discs (P<.001). Color stability of zirconia ceramics with graphene oxide reinforcement was affected by hydrothermal aging.