Active manganese oxide: a novel adsorbent for treatment of wastewater containing azo dye


Chakrabarti S., Dutta B. K., Apak R.

WATER SCIENCE AND TECHNOLOGY, cilt.60, sa.12, ss.3017-3024, 2009 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 60 Sayı: 12
  • Basım Tarihi: 2009
  • Doi Numarası: 10.2166/wst.2009.758
  • Dergi Adı: WATER SCIENCE AND TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.3017-3024
  • İstanbul Üniversitesi Adresli: Evet

Özet

A new variety of active manganese oxide was prepared, characterized, and tested for its potential of adsorbing Congo Red, a dis-azo dye, from aqueous solutions. Both equilibrium and kinetics were investigated over different values of process parameters such as temperature (25-45 degrees C), adsorbent loading (0.4-0.6%), initial dye concentration (50-500 mg/L), presence of salts (sodium sulphate, 500 mg/L) and the oxygen content (MnOx, x 1.2, 1.33 and 2) of the adsorbent. The equilibrium adsorption data were fitted to Langmuir and Freundlich isotherms. Langmuir adsorption capacity of the sorbent (x - 1.33) for Congo Red was 38.6 mg/g at room temperature which is substantially higher than those for commercial manganese dioxide, red mud, coir pith, activated carbon, and fly ash. The kinetic data were best interpreted using a pseudo-second order model. The results show that the active manganese oxide used in this work removes the dye by reversible adsorption and has the potential for practical use for remediation of textile industry effluents.