Separation of colemanite from tailings using the pilot scale flotation column


ŞAHBAZ O., UÇAR A., ÖTEYAKA B., Tas O. O., Ozdemir O.

POWDER TECHNOLOGY, cilt.309, ss.31-36, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 309
  • Basım Tarihi: 2017
  • Doi Numarası: 10.1016/j.powtec.2016.12.077
  • Dergi Adı: POWDER TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.31-36
  • İstanbul Üniversitesi Adresli: Evet

Özet

The tailing discharged in mineral processing plants is not only an economical loss, but also an environmental problem in mining industry. For example, fine grained tailing of Emet Boron Concentrator in Kutahya/Turkey is discharged to the slurry pond. However, the B2O3 content of the tailing is about 26%, and therefore, it can be accepted as a valuable boron source after the determination of suitable method/methods to recycle these tailings. In this context, this study was aimed to utilize a column flotation technique to recycle the colemanite tailings after scrubbing-classification process. The effect of some operational parameters such as bias factor and superficial gas velocity was investigated on column flotation of colemanite in terms of recovery and grade. According to the results, a concentrate having nearly 45% B2O3 with a recovery of 99% was obtained from the tailings sample with 26% B2O3 using the flotation column. Finally, a colemanite concentrate of 43.12%B2O3 was produced with a recovery of 93.46% using scrubbing-classification followed by flotation processes. (C) 2016 Elsevier B.V. All rights reserved.