Multifunctionalized Conductive Polymers for Self-Healing Silicon Anodes in Li-Ion Batteries
ACS Omega, cilt.10, sa.30, ss.33607-33618, 2025 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 10 Sayı: 30
- Basım Tarihi: 2025
- Doi Numarası: 10.1021/acsomega.5c04052
- Dergi Adı: ACS Omega
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Directory of Open Access Journals
- Sayfa Sayıları: ss.33607-33618
- İstanbul Üniversitesi Adresli: Evet
Özet
Silicon is a very promising material for lithium-ion batteries (LIBs) due to its high theoretical capacity (3579 mAh/g). However, the volumetric expansion (300%) of silicon during lithiation led to pulverization of the electrode and rapid capacity fading. Self-healing (SH) materials are thought of as a solution for the degradation of active materials, enabling higher capacity retention. Here, we synthesized and integrated an autonomous self-healing poly(aniline-co-3-aminophenylboronic acid)/PVA composite (SHC) as a binder in a Si anode electrode for LIBs. The synthesized SHC was investigated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis, and elongation and conductivity tests. Si anodes were prepared with SHC and a PVP cobinder. In addition, Si anodes were prepared separately with PVDF and the CMC-SBR binder as control electrodes. The electrodes were electrochemically characterized by electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic charge/discharge tests. The conductive SHC binder was successfully integrated into the Si anode, and a capacity of over 1700 mAh/g was obtained after 100 cycles at C/10, and 650 mAh/g was obtained after 200 cycles at C/2.