Prof. Dr. Muhammet G&#220;L

MATHEMATICAL PROBLEMS IN ENGINEERING , cilt.2021, 2021 (SCI-Expanded)

57. Hospital Preparedness Assessment against COVID-19 Pandemic: A Case Study in Turkish Tertiary Healthcare Services

Gul M., Yucesan M.

MATHEMATICAL PROBLEMS IN ENGINEERING , cilt.2021, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

58. Forecasting daily natural gas consumption with regression, time series and machine learning based methods

Yucesan M., Pekel E., Çelik E., Gul M., Serin F.

Energy Sources, Part A: Recovery, Utilization and Environmental Effects , 2021 (SCI-Expanded, Scopus)

59. Preface

Gul M., Mete S., Serin F., ÇELİK E.

Studies in Fuzziness and Soft Computing , cilt.398, 2021 (SCI-Expanded)

60. Metaheuristic Approaches Integrated with ANN in Forecasting Daily Emergency Department Visits

Pekel E., Gul M., ÇELİK E., Yousefi S.

Mathematical Problems in Engineering , cilt.2021, 2021 (SCI-Expanded, Scopus)

61. An FMEA-based TOPSIS approach under single valued neutrosophic sets for maritime risk evaluation: the case of ship navigation safety

Bashan V., Demirel H., Gul M.

SOFT COMPUTING , cilt.24, sa.24, ss.18749-18764, 2020 (SCI-Expanded)

62. A manufacturing failure mode and effect analysis based on fuzzy and probabilistic risk analysis

Gul M., Yucesan M., ÇELİK E.

Applied Soft Computing Journal , cilt.96, 2020 (SCI-Expanded, Scopus)

63. A fuzzy-based occupational health and safety risk assessment framework and a case study in an international port authority

JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY , cilt.19, sa.4, ss.161-175, 2020 (SCI-Expanded)

64. Evaluation of hospital disaster preparedness by a multi-criteria decision making approach: The case of Turkish hospitals

Ortiz-Barrios M., Gul M., Lopez-Meza P., Yucesan M., Navarro-Jimenez E.

INTERNATIONAL JOURNAL OF DISASTER RISK REDUCTION , cilt.49, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

65. Application of Pythagorean fuzzy AHP and VIKOR methods in occupational health and safety risk assessment: the case of a gun and rifle barrel external surface oxidation and colouring unit

INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS , cilt.26, sa.4, ss.705-718, 2020 (SSCI) Sürdürülebilir Kalkınma

66. Assessment of occupational risks from human health and environmental perspectives: a new integrated approach and its application using fuzzy BWM and fuzzy MAIRCA

Gul M., Ak M. F.

STOCHASTIC ENVIRONMENTAL RESEARCH AND RISK ASSESSMENT , cilt.34, sa.8, ss.1231-1262, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

67. Emergency department network under disaster conditions: The case of possible major Istanbul earthquake

Gul M., GÜNERİ A. F., Gunal M. M.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY , cilt.71, sa.5, ss.733-747, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

68. Evaluating occupational health and safety service quality by SERVQUAL: a field survey study

Demir P., Gul M., GÜNERİ A. F.

TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE , cilt.31, sa.5-6, ss.524-541, 2020 (SSCI)

69. A NOVEL RISK EVALUATION APPROACH FOR FREQUENTLY ENCOUNTERED RISKS IN SHIP ENGINE ROOMS

Bashan V., Demirel H., Gul M.

BRODOGRADNJA , cilt.71, sa.2, ss.31-54, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

70. An integrated approach of best-worst method (bwm) and triangular fuzzy sets for evaluating driver behavior factors related to road safety

Moslem S., Gul M., Farooq D., Celik E., Ghorbanzadeh O., Blaschke T.

Mathematics , cilt.8, sa.3, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

71. Hospital service quality evaluation: an integrated model based on Pythagorean fuzzy AHP and fuzzy TOPSIS

Yucesan M., Gul M.

SOFT COMPUTING , cilt.24, sa.5, ss.3237-3255, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

72. Development and application of a novel hybrid occupational risk assessment model

International Journal of Reliability and Safety , cilt.14, sa.2-3, ss.116-136, 2020 (Scopus) Sürdürülebilir Kalkınma

73. A multi-method patient arrival forecasting outline for hospital emergency departments

Yucesan M., Gul M., ÇELİK E.

International Journal of Healthcare Management , cilt.13, sa.S1, ss.283-295, 2020 (ESCI, Scopus)

74. An exhaustive review and analysis on applications of statistical forecasting in hospital emergency departments

Gul M., Celik E.

Health Systems , cilt.9, sa.4, ss.263-284, 2020 (ESCI, Scopus)

75. Stochastic multi-criteria decision-making: an overview to methods and applications

ÇELİK E., Gul M., Yucesan M., Mete S.

Beni-Suef University Journal of Basic and Applied Sciences , cilt.8, sa.1, 2019 (ESCI, Scopus)

76. Emergency department ergonomic design evaluation: A case study using fuzzy DEMATEL-focused two-stage methodology

Gul M., GÜNERİ A. F., Nasirli S. M.

HEALTH POLICY AND TECHNOLOGY , cilt.8, sa.4, ss.365-376, 2019 (SSCI) Sürdürülebilir Kalkınma

77. A decision-support system based on Pythagorean fuzzy VIKOR for occupational risk assessment of a natural gas pipeline construction

Mete S., Serin F., Oz N. E., Gul M.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING , cilt.71, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

78. A fuzzy-based model for risk assessment of routes in oil transportation

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY , cilt.16, sa.8, ss.4671-4686, 2019 (SCI-Expanded)

79. Risk assessment for clearing and grading process of a natural gas pipeline project: An extended TOPSIS model with Pythagorean fuzzy sets for prioritizing hazards

Oz N. E., Mete S., Serin F., Gul M.

HUMAN AND ECOLOGICAL RISK ASSESSMENT , cilt.25, sa.6, ss.1615-1632, 2019 (SCI-Expanded)

80. Pythagorean fuzzy VIKOR-based approach for safety risk assessment in mine industry

Gul M., Ak M. F., GÜNERİ A. F.

JOURNAL OF SAFETY RESEARCH , cilt.69, ss.135-153, 2019 (SSCI)

81. An integrated best-worst and interval type-2 fuzzy TOPSIS methodology for green supplier selection

Yucesan M., Mete S., Serin F., Celik E., Gul M.

Mathematics , cilt.7, sa.2, 2019 (SCI-Expanded, Scopus)

82. Measuring development levels of NUTS-2 regions in Turkey based on capabilities approach and multi-criteria decision-making

Ozdemir Y., Gul M.

COMPUTERS & INDUSTRIAL ENGINEERING , cilt.128, ss.150-169, 2019 (SCI-Expanded)

83. Performance comparison between ARIMAX, ANN and ARIMAX-ANN hybridization in sales forecasting for furniture industry Usporedba performansi modela ARIMAX, ANN i hibridizacije ARIMAX-ANN u predviđanju prodaje za industriju namještaja

Yucesan M., Gul M., Celik E.

Drvna Industrija , cilt.69, sa.4, ss.357-370, 2018 (SCI-Expanded)

84. Fuzzy rule-based Fine–Kinney risk assessment approach for rail transportation systems

Gul M., Celik E.

Human and Ecological Risk Assessment , cilt.24, sa.7, ss.1786-1812, 2018 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

85. A comparative outline for quantifying risk ratings in occupational health and safety risk assessment

Gul M., Ak M. F.

JOURNAL OF CLEANER PRODUCTION , cilt.196, ss.653-664, 2018 (SCI-Expanded)

86. An occupational risk assessment approach for construction and operation period of wind turbines

Gul M., GÜNERİ A. F., Baskan M.

GLOBAL JOURNAL OF ENVIRONMENTAL SCIENCE AND MANAGEMENT-GJESM , cilt.4, sa.3, ss.281-298, 2018 (ESCI) Sürdürülebilir Kalkınma

87. A new Fine-Kinney-based risk assessment framework using FAHP-FVIKOR incorporation

Gul M., Guven B., GÜNERİ A. F.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES , cilt.53, ss.3-16, 2018 (SCI-Expanded)

88. Application of Artificial Neural Networks to the prediction of out-of-plane response of infill walls subjected to shake table

Onat O., Gul M.

SMART STRUCTURES AND SYSTEMS , cilt.21, sa.4, ss.521-535, 2018 (SCI-Expanded)

89. A fuzzy logic based PROMETHEE method for material selection problems

GÜL M., ÇELİK E., TAŞKIN GÜMÜŞ A., GÜNERİ A. F.

BENI-SUEF UNIVERSITY JOURNAL OF BASIC AND APPLIED SCIENCES , cilt.7, sa.1, ss.68-79, 2018 (Hakemli Dergi)

90. Sarsma Tablasına Maruz Kalan Dolgu Duvarların Göreli Maksimum Düzlem-Dışı Deplasmanının Yapay Sinir Ağı Modelleri ile Tahmini

ONAT O., GÜL M.

Fırat Üniversitesi Mühendislik Bilimleri Dergisi , cilt.30, sa.1, ss.9-19, 2018 (Hakemli Dergi)

91. A review of occupational health and safety risk assessment approaches based on multi-criteria decision-making methods and their fuzzy versions

HUMAN AND ECOLOGICAL RISK ASSESSMENT , cilt.24, sa.7, ss.1723-1760, 2018 (SCI-Expanded)

92. Project management in healthcare: A case for patient flow evaluating in an emergency room using fuzzy CPM and fuzzy PERT

GÜL M., GÜNERİ A. F., GÜNEŞ G.

Sigma Journal of Engineering and Natural Sciences , cilt.8, sa.1, ss.41-51, 2017 (Hakemli Dergi)

93. Application of artificial neural networks using bayesian training rule in sales forecasting for furniture industry Primjena umjetnih neuronskih mreža uz pomoć Bayesova pravila učenja u predviđanju prodaje za industriju namještaja

Yucesan M., Gul M., Celik E.

Drvna Industrija , cilt.68, sa.3, ss.219-228, 2017 (SCI-Expanded)

94. ANFIS kullanarak Tunceli ili için global güneş radyasyonu tahmini

GÜL M., ÇELİK E.

Dicle Üniversitesi Mühendislik Fakültesi (DUMF) Mühendislik Dergisi , cilt.8, sa.4, ss.891-899, 2017 (Hakemli Dergi)

95. An Efficiency Evaluation Model for Academic Faculties of a Leading University by Data Envelopment Analysis

GÜL M., YÜCESAN M., DUMAN O.

İşletme Araştırmaları Dergisi , cilt.3, sa.9, ss.60-71, 2017 (Hakemli Dergi)

96. A hybrid risk-based approach for maritime applications: The case of ballast tank maintenance

Gul M., Celik E., Akyuz E.

Human and Ecological Risk Assessment , cilt.23, sa.6, ss.1389-1403, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

97. Assessment of occupational hazards and associated risks in fuzzy environment: A case study of a university chemical laboratory

Ozdemir Y., Gul M., Celik E.

Human and Ecological Risk Assessment , cilt.23, sa.4, ss.895-924, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

98. Occupational health and safety risk assessment in hospitals: A case study using two-stage fuzzy multi-criteria approach

Gul M., Ak M. F., GÜNERİ A. F.

HUMAN AND ECOLOGICAL RISK ASSESSMENT , cilt.23, sa.2, ss.187-202, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

99. An artificial neural network-based earthquake casualty estimation model for Istanbul city

NATURAL HAZARDS , cilt.84, sa.3, ss.2163-2178, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

100. A state of the art literature review of VIKOR and its fuzzy extensions on applications

Gul M., Celik E., AYDIN N., TAŞKIN GÜMÜŞ A., GÜNERİ A. F.

Applied Soft Computing Journal , cilt.46, ss.60-89, 2016 (SCI-Expanded, Scopus)

101. A fuzzy multi criteria risk assessment based on decision matrix technique: A case study for aluminum industry

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES , cilt.40, ss.89-100, 2016 (SCI-Expanded)

102. Emergency department performance evaluation by an integrated simulation and interval type-2 fuzzy MCDM-based scenario analysis

Gul M., Celik E., Gumus A. T., GÜNERİ A. F.

European Journal of Industrial Engineering , cilt.10, sa.2, ss.196-223, 2016 (SCI-Expanded, Scopus)

103. Planning the future of emergency departments: Forecasting ed patient arrivals by using regression and neural network models

International Journal of Industrial Engineering : Theory Applications and Practice , cilt.23, sa.2, ss.137-154, 2016 (SCI-Expanded)

104. Are Emergency Departments in Istanbul Ready for the Earthquakes? Past Experience and Suggestions for Future Preparedness from Employees' Viewpoint and the Literature

JOURNAL OF HOMELAND SECURITY AND EMERGENCY MANAGEMENT , cilt.12, sa.4, ss.967-983, 2015 (SSCI)

105. A comprehensive review of multi criteria decision making approaches based on interval type-2 fuzzy sets

Celik E., Gul M., AYDIN N., Gumus A. T., GÜNERİ A. F.

Knowledge-Based Systems , cilt.85, ss.329-341, 2015 (SCI-Expanded, Scopus)

106. A comprehensive review of emergency department simulation applications for normal and disaster conditions

COMPUTERS & INDUSTRIAL ENGINEERING , cilt.83, ss.327-344, 2015 (SCI-Expanded)

107. A fuzzy AHP methodology for selection of risk assessment methods in occupational safety

GÜNERİ A. F., Gul M., Ozgurler S.

International Journal of Risk Assessment and Management , cilt.18, sa.3-4, ss.319-335, 2015 (Scopus)

108. A computer simulation model to reduce patient length of stay and to improve resource utilization rate in an emergency department service system

GÜL M., ÇELİK E., GÜNERİ A. F., TAŞKIN GÜMÜŞ A.

International Journal of Industrial Engineering : Theory Applications and Practice , cilt.19, sa.5, ss.221-231, 2012 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 57

1. Avalanche Risk Analysis by a Combined Geographic Information System and Bayesian Best-Worst Method

Konurhan Z., Yucesan M., Gül M.

The International Workshop on Best-Worst Method (BWM 2023), Zuid-Holland, Hollanda, 8 - 09 Haziran 2023, ss.193-210, (Tam Metin Bildiri)

2. Determining the Criterion Weights for the Selection of Volunteers in Humanitarian Organizations by the Best-Worst Method

Ozdemir U., Mete S., Gül M.

The International Workshop on Best-Worst Method (BWM 2023), Zuid-Holland, Hollanda, 8 - 09 Haziran 2023, ss.155-167, (Tam Metin Bildiri)

3. Constructing the criteria in determining the product groups for Agriculture 4.0 applications

Erdogan M., Konurhan Z., Yucesan M., Gül M.

International Conference on Science, Engineering Management and Information Technology, Ankara, Türkiye, 14 - 15 Eylül 2023, ss.95, (Tam Metin Bildiri)

4. Development of an approach combining Bayesian network, stratified Best-Worst Method and TOPSIS Sort methods for occupational safety risk assessment and its application in a ready mixed concrete plant

Karci C., Yucesan M., Gül M.

2nd International Conference on Advances and Innovations in Engineering (2’ICAIE), Elazığ, Türkiye, 21 - 23 Eylül 2023, ss.1, (Özet Bildiri)

5. A GIS-Based BWM Approach for the Location Selection of Solar Power Plant in Tunceli Province (Turkey)

Konurhan Z., Yucesan M., GÜL M.

3rd International Workshop on Best-Worst Method (BWM), Delft, Hollanda, 9 - 10 Haziran 2022, ss.87-102, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

6. Investigation of issues affecting thermal comfort in water system underfloor heating applications of buildings with Bayesian networks

ERKOL S., YÜCESAN M., GÜL M., GÜNERİ A. F.

6th International Conference on Advances in Mechanical Engineering (ICAME2021), İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1243-1247, (Tam Metin Bildiri)

7. Hastane afet hazırlığı için çok kriterli bir karar modeli

SANER H. S., YÜCESAN M., GÜL M.

2nd International Disaster Management Congress, 24 Eylül 2021, ss.27, (Özet Bildiri)

8. A Multi-attribute Decision-Making to Sustainable Construction Material Selection: A Bayesian BWM-SAW Hybrid Model

ALKAN R., YÜCESAN M., GÜL M.

The Second International Workshop on Best-Worst Method (BWM 2021), DELFT, Hollanda, 10 Haziran 2021, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

9. A risk assessment approach using both stochastic data and subjective judgments

Mete S., Oz N. E., Gul M., Serin F., Celik E.

International Conference on Intelligent and Fuzzy Systems, INFUS 2019, İstanbul, Türkiye, 23 - 25 Temmuz 2019, cilt.1029, ss.1104-1111, (Tam Metin Bildiri)

10. A Bayesian network-based approach for failure analysis in weapon industry

YÜCESAN M., GÜL M., GÜNERİ A. F.

5th International Conference on Advances in Mechanical Engineering (ICAME2019), İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.456-461

11. A Pythagorean fuzzy PROMETHEE-based decision model and its application to assessing development levels of regions in Turkey

GÜL M., SERİN F., METE S., ÇELİK E., ÇİL Z. A.

International Design and Engineering Symposium (IDES’19), İzmir, Türkiye, 10 - 12 Ekim 2019, ss.363-368, (Tam Metin Bildiri)

12. Simple Disassembly Line Balancing Problem: An Efficient Heuristic Algorithm with Deterministic Task Times

METE S., SERİN F., ÇİL Z. A., Celik E., GÜL M.

10th International Symposium on Intelligent Manufacturing and Service Systems - (IMSS’19), Sakarya, Türkiye, 9 - 11 Eylül 2019

13. Effects of Uncertainty in Unified Design of Assembly and Disassembly Lines: A chance-constrained, Piecewise-linear Program

METE S., ÇİL Z. A., SERİN F., GÜL M., Celik E.

International Conference on Data Science, Machine Learning and Statistics (DMS-2019), Van, Türkiye, 26 - 29 Haziran 2019, (Tam Metin Bildiri)

14. Support Vector Machine Algorithm for Predicting the Bus Arrival Time in Public Transportation

SERİN F., METE S., GÜL M., Celik E.

International Conference on Data Science, Machine Learning and Statistics (DMS-2019), Van, Türkiye, 26 - 29 Haziran 2019, (Tam Metin Bildiri)

15. A novel occupational risk assessment approach based on fuzzy VIKOR and k-means clustering algorithm

GÜL M., SERİN F., METE S., Celik E.

International Conference on Data Science, Machine Learning and Statistics (DMS-2019, Van, Türkiye, 26 - 29 Haziran 2019

16. Deprem Durumu Acil Sağlık Yönetimi İçin Optimizasyon Ve Simülasyon Tabanlı Bir Model Önerisi

KANGA Ö., AYDIN N., GÜL M., ÇELİK E., GÜNAL M. M., TAŞKIN GÜMÜŞ A., et al.

39. Yöneylem Araştırması / Endüstri Mühendisliği Kongresi, Ankara, Türkiye, 12 - 14 Haziran 2019, ss.77, (Özet Bildiri)

17. Mapping between relational database management systems and graph database for public transportation network

SERİN F., METE S., GÜL M., ÇELİK E.

21st International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2018, Karlovy-Vary, Çek Cumhuriyeti, 18 - 22 Eylül 2018, ss.209-212, (Tam Metin Bildiri)

18. A simulation model to improve production processes in an implant manufacturing plant

GÜL M., YÜCESAN M., SERİN F., ÇELİK E.

19. A genetic algorithm approach for rebalancing of assembly line problem

ÇİL Z. A., SERİN F., GÜL M., ÇELİK E., METE S.

20. A combined multi criteria decision making method for ERP project manager selection

GÜNERİ A. F., GÜL M., ÇELİK E., TAŞKIN GÜMÜŞ A., ATAOKAY B.

2018 ICBTS International Academic Multidiscipline Research Conference, Oslo, Norveç, 25 - 27 Temmuz 2018, (Tam Metin Bildiri)

21. Sales forecasting of white goods by SARIMA-ANN hybrid approach

YÜCESAN M., GÜL M., ÇELİK E.

International Congres on Engineering and Life Sciences (ICELIS-2018), Kastamonu, Türkiye, 26 - 29 Nisan 2018, (Özet Bildiri)

22. Evaluating service quality criteria in hospital healthcare management and delivery using a causal and effect decision making model

YÜCESAN M., GÜL M., ÇELİK E.

International Congres on Engineering and Life Sciences (ICELIS-2018), Kastamonu, Türkiye, 26 - 29 Nisan 2018, (Özet Bildiri)

23. A modified two-dimensional (2D) risk model for occupational health and safety (OHS) risk assessment in mining environments

AK M. F., GÜL M.

1st International Symposium on Innovative Approaches in Scientific Studies (ISAS 2018), Antalya, Türkiye, 11 - 13 Nisan 2018, (Özet Bildiri)

24. A ranking model for the cities of TRB1 region in terms of regional development by using TOPSIS methodology

4th International Regional Development Conference, Tunceli, Türkiye, 21 - 23 Eylül 2017, ss.1089

25. Logistic performances evaluation of the cities of TRB1 region using a hybrid decision making approach

4th International Regional Development Conference, Tunceli, Türkiye, 21 - 23 Eylül 2017, ss.1096, (Özet Bildiri)

26. A Review and Classification of Approaches for Dealing with TODIM and Its Applications

GÜNERİ A. F., GÜL M., GÜLTEKİN T.

The 5th International Fuzzy Systems Symposium (FUZZYSS’17), Ankara, Türkiye, 14 - 15 Ekim 2017, ss.47

27. İmplant İmalatı için Satış Tahmininde Yapay Sinir Ağlarının Uygulanması

YÜCESAN M., GÜL M., ÇELİK E.

2nd International Conference on Advanced Engineering Technologies (ICADET-2017), Bayburt, Türkiye, 21 - 23 Eylül 2017, (Özet Bildiri)

28. Bir İmplant Üretim Tesisi için Simülasyon Projesine Doğru: İşlem Sürelerinin Başlangıç Veri Analizi

ÇELİK E., GÜL M., YÜCESAN M.

2nd International Conference on Advanced Engineering Technologies (ICADET-2017), Bayburt, Türkiye, 21 - 23 Eylül 2017

29. Multi-site and multi-method forecasting modelling of hospital emergency room patient arrivals

GÜL M., YÜCESAN M., ÇELİK E.

International Conference on Advances and Innovations in Engineering (ICAIE), Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.134-138, (Tam Metin Bildiri)

30. A unique comparative ERP consultant selection approach in SMEs under uncertainty and vagueness

GÜNERİ A. F., GÜL M., ÇELİK E., TAŞKIN GÜMÜŞ A., BÜYÜKÖZKAN M.

2017 ICBTS International Multidiscipline Research Conference, Munich, Almanya, 4 - 06 Mayıs 2017, (Özet Bildiri)

31. Forecasting daily patient visits in an emergency department by ga-ann hybrid approach

Pekel E., Gul M., Celik E.

14th International Symposium on Operational Research, SOR 2017, Bled, Slovenya, 27 - 29 Eylül 2017, cilt.2017-September, ss.473-478, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

32. An application of proportional risk assessment technique in aluminum extrusion industry

GÜL M., GÜNERİ A. F., KÖSE Y.

VIII. International Conference on Occupational Safety & Health, İstanbul, Türkiye, 8 - 11 Mayıs 2016, (Tam Metin Bildiri)

33. SWOT analysis of health tourism and a road map for Turkey

International Academic Multidisciplinary Research Conference 2016 (ICBTS 2016), Zürich, İsviçre, 4 - 06 Ağustos 2016, ss.73-78

34. Simulating a network of emergency departments Providing insights for building an earthquake conditions related multi ED simulation model

2nd International Conference on Engineering and Natural Sciences (ICENS-2016), Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, (Özet Bildiri)

35. Risk assessment for period of construction and operation of a wind turbine

GÜL M., GÜNERİ A. F., BAŞKAN M.

VIII. International Conference on Occupational Safety & Health, İstanbul, Türkiye, 8 - 11 Mayıs 2016, (Tam Metin Bildiri)

36. Preparedness of an emergency department network for a major earthquake: A discrete event simulation-based design of experiments study

Uncertainty Modelling in Knowledge Engineering and Decision Making - 12th International Fuzzy Logic and Intelligent Technologies in Nuclear Science Conference, FLINS 2016, Roubaix, Fransa, 24 - 26 Ağustos 2016, ss.543-548, (Tam Metin Bildiri)

37. Project management in healthcare A case for evaluating patient flow of an emergency room with fuzzy CPM and fuzzy PERT

GÜL M., GÜNERİ A. F., GÜNEŞ G.

4th International Fuzzy Systems Symposium (FUZZYSS 15), İstanbul, Türkiye, 5 - 06 Kasım 2015, ss.211-215, (Tam Metin Bildiri)

38. A discrete event simulation model of an emergency department network for earthquake conditions

6th International Conference on Modeling, Simulation, and Applied Optimization, ICMSAO 2015, İstanbul, Türkiye, 27 - 29 Mayıs 2015, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

39. A fuzzy approach for hotel location selection in Mugla Turkey

GÜNERİ A. F., GÜL M., LÖK M.

European Academic Conference on Tourism Transport and Technology (ICTTT2015), Paris, Fransa, 12 - 15 Nisan 2015, ss.114-122, (Tam Metin Bildiri)

40. Forecasting patient length of stay in an emergency department by Artificial Neural Networks

6th International Conference on Value Chain Sustainability (ICOVACS 2015), İstanbul, Türkiye, 12 - 13 Mart 2015, ss.390-396

41. MULTI-OBJECTIVE OPTIMIZATION ON THE BASIS OFRATIO ANALYSIS FOR SANDWICH COMPOSITEMATERIAL SELECTION UNDER UNCERTAINTY

ÖZDEMİR O., SABANCI E., ÇELİK E., GÜL M., SOYKÖK İ. F., KARAKUZU R.

15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2014, (Tam Metin Bildiri)

42. Modeling Emergency Department Patient Surge in Disaster Conditions by Simulation

15th International Conference on Operational Research KOI 2014, Osijek, Hırvatistan, 24 - 26 Eylül 2014, ss.72, (Özet Bildiri)

43. Simulation modeling of hospital emergency departments Review of literature during normal and disaster times

GÜL M., ÇELİK E., GÜNERİ A. F., TAŞKIN GÜMÜŞ A.

Global Conference on Healthcare Systems Engineering (GCHSE 2014), İstanbul, Türkiye, 5 - 08 Ağustos 2014, ss.121-132, (Tam Metin Bildiri)

44. Change Management A Real Case Application in Merging Companies

GÜNERİ A. F., PARLAK M., ŞEN C. K., GÜL M.

International Conference on Tourism Transport Technology (ICTTT 2014), Londrina, Brezilya, 1 - 03 Ağustos 2014, ss.21-30, (Tam Metin Bildiri)

45. Acil servis benzetimi için veri madenciliği ve analizi

GÜL M., GÜNERİ A. F., KARACAN İ., GÜNAL M. M.

34th National Conference for Operations Research and Industrial Engineering (YAEM 2014), Bursa, Türkiye, 25 - 27 Haziran 2014, ss.21, (Özet Bildiri)

46. Prioritization of emergency department key performance indicators by using Fuzzy AHP

GÜL M., GÜNERİ A. F., TOZLU Ş.

15th International Symposium on Econometrics, Operations Research and Statistics, Isparta, Türkiye, 22 - 25 Mayıs 2014, ss.644-654, (Tam Metin Bildiri)

47. L Tipi Matris Metodu Kullanılarak İnşaat Sektöründe Risk Değerlendirmesi

GÜNERİ A. F., GÜL M., MEVLEVİ M.

VII. International Conference on Occupational Safety Health, İstanbul, Türkiye, 5 - 07 Mayıs 2014, (Özet Bildiri)

48. L Matrix Method Based Risk Assessment By Using Fuzzy Decision Making Approaches

GÜL M., GÜNERİ A. F., SELVİ A.

VII. International Conference on Occupational Safety Health, İstanbul, Türkiye, 5 - 07 Mayıs 2014, (Özet Bildiri)

49. Prioritization of Risk Evaluation Methods for Occupational Safety with Fuzzy Multi Criteria Decision Making

GÜNERİ A. F., GÜL M.

26th European Conference on Operational Research, ROMA, İtalya, 1 - 04 Temmuz 2013, ss.338, (Özet Bildiri)

50. A Hybrid Dynamic VIKOR GRA Approach for Financial Performance Evaluation of Turkish Manufacturing Industry

26th European Conference on Operational Research, ROMA, İtalya, 1 - 04 Temmuz 2013, ss.210, (Özet Bildiri)

51. Finansal Performans Değerlendirme için Bütünleşik bir Dinamik Çok Kriterli Karar Verme Yaklaşımı

33. Yöneylem Araştırması ve Endüstri Mühendisliği Ulusal Kongresi, İstanbul, Türkiye, 26 - 28 Haziran 2013

52. TABAKALI KOMPOZİT MALZEME SEÇİMİ İÇİN MELEZ BİRÇOK KRİTERLİ KARAR VERME YAKLAŞIMI

SABANCI E., GÜL M., ÇELİK E., KARAKUZU R.

XIVth International Symposium on Econometrics, Operations Research and Statistics, SARAY BOSNA, Bosna-Hersek, 24 - 28 Mayıs 2013, ss.182, (Özet Bildiri)

53. A Decision Making For Selection Of Composite Material Using Compromise Ranking And Outranking Methods

ÇELİK E., SABANCI E., GÜL M., KARAKUZU R.

The 10th International Materials Syposium, Denizli, Türkiye, 10 - 12 Ekim 2012, ss.11-17

54. A Fuzzy TOPSIS Approach Based on Trapezoidal Numbers to Material Selection Problem